Abstract:
In developing countri es, 3040o/o of agricultural production is lost post-harvest, with
paddy being particularly vulnerable. Reducing moisture content is essential to extend shelf
life and prevent microbial growth, which is traditionally achieved through sun drying.
However, sun drying is highly dependent on weather conditions and labor availability.
This study aimed to develop and test an automated temperature-controlled seed dryer as
an altemative drying method to improve efficiency, maintain a controlled environment,
and minimize post-harvest losses. The experiment was conducted in two phases. In the
first phase, the automated seed dryer was tested across three temperature ranges (30-35"C,
3540"C, and 4045"C) and three drying masses (1.0 kg, 0.5 kg, and 0.25 kg) using a
Factorial Complete Randomized Design (CRD). In the second phase, the perfonnance of
the automated seed dryer was compared with solar drying and open sun drying, using a
fixed drying mass of 1.0 kg. Results showed that temperature did not significantly affect
the drying rate in the automated seed dryer (p : 0.489), but drying mass had a significant
impact (p:0.024). The 0.25kgmass exhibited the fastest drying rate (11.5853 kg/h),
significantly higher than the 1.0 kg and 0.5 kg masses. The optimum condition for drying
in the automated seed dryer was obsered at the 0.25 kg dryrng mass and a temperature
range of 40-45'C, where the drying process was most efficient, with rapid moisture
reduction. In the comparison of drying methods, open sun drying was the fastest, reducing
the moisture content of 1.0 kg of paddy to l4o/o in 2 hours, followed by the automated
seed dryer rn2.4hours and the solar dryer in 3 hours. ANOVA analysis showed significant
differences in drying time across the methods (p < 0.05). The moisture ratio (MR) analysis
indicated that the solar dryer had the highest MR (0.901), followed by the automated seed
dryer (0.881) and open sun drying (0.360). In conclusion, the automated seed dryer
demonstrated consistent and controlled dryrng, parlicularly for smaller dryrng loads,
offering a reliable alternative to traditional methods for improving post-harvest effrciency.
